201 Decoration Stainless Steel Tube

Decorative pipe is a kind of welded pipe, which is widely used in decoration industry.Steel pipes are usually welded from steel or steel strips after they have been curled and formed by machine sets and dies.With”Simple production process”, “high production efficiency”, “more varieties” and “specifications”, “less equipment cost”.

Detailed introduction

About decoration stainless steel pipe

Standard specifications for stainless steel pipe

Inch	DN (mm)	OD (mm)	SCH5S	SCH10S	SCH10	SCH20	SCH30	SCH40	SCH60	SCH80	SCH100	SCH120	--
1/8	DN6	10.3		1.24				1.73		2.42
1/4	DN8	13.7		1.65				2.24		3.02
3./8	DN10	17.1		1.65				2.31		3.2
1/2	DN15	21.3	1.65	2.11				2.77		3.73
3/4	DN20	26.7	1.65	2.11				2.87		3.91
1	DN25	33.4	1.65	2.77				3.38		4.55
1 1/4	DN32	42.2	1.65	2.77				3.56		4.85
1 1/2	DN40	48.3	1.65	2.77				3.68		5.05
2	DN50	60.3	1.65	2.77				3.91		5.54
2 1/2	DN65	73.0	2.11	3.05				5.16		7.01
3	DN80	88.9	2.11	3.05				5.49		7.62
3 1/2	DN90	101.6	2.11	3.05				5.74		8.08
4	DN100	114.3	2.11	3.05				6.02		8.58		11.13
5	DN125	141.3	2.77	3.4				6.55		9.53		12.7
6	DN150	168.3	2.77	3.4				7.11		10.97		14.27
8	DN200	219.1	2.77	3.76		6.35	7.04	8.18	10.31	12.7	15.09	18.26
10	DN250	273.1	3.40	4.19		6.35	7.8	9.27	12.7	15.09	18.26	21.44
12	DN300	323.9	3.96	4.57		6.35	8.38	10.31	14.27	17.48	21.44	25.4
14	DN350	355.5	3.96	4.78	6.35	7.92	9.53	11.13	15.09	19.05	23.83	27.79
----

201 decorative pipe is the most widely used one, widely used in the building decoration industry, tableware production and so on. Low cost, good quality

Chemical composition and Physical property

Grade	C(%)	Si(%)	Mn(%)	Cr(%)	P(%)	S(%)	N（%)	Ni(%)	Cu(%)
201	≤0.15	≤0.75	5.50-7.50	16.00-18.00	≤0.06	≤0.03	≤0.25	≤0.6	0.80-1.50

Grade	TS(Mpa)	YS(Mpa)	EL(Mpa)
201	≥520	≥270	55.00-60.00

Prev : No Prev
Next :430 Stainless Steel Pipe

Return